When moving electronics, you want electronic equipment movers with the knowledge, skills and equipment necessary to protect your investment and provide a stress-free move.
Whether moving sophisticated laboratory equipment, high-value computer and communications systems, or an inventory of electronic components, DRN Moving will complete the move to our customers satisfaction, on time and on budget with minimal downtime.
Beginning with an initial survey of items to be moved as well as the location you’re moving from and to, we will work with you to plan every part of your move in detail.
Our technicians are well-trained in moving sensitive electronics and will ensure your equipment is safely packed and moved. Special packaging and crating protects electronics during relocation.
If you want the very latest, just give us a call toll free at (877)344-MOVE..
If any piece of equipment has a toner or ink cartridge, remove it and store it in a sealable bag. Pack the bag in the same box with the piece of equipment that it was removed from. Also remove all CDs, DVDs, VHS tapes or other media from equipment. Pack media separately and carefully to prevent damage. Note: Some computer manufacturers recommend leaving a floppy disk in the A-drive to prevent drive damage.
If specialty boxes or return kits are not available, use a double-walled box slightly larger than the piece of equipment you're moving.
For extra protection, write down detailed step-by-step instructions on how you're dismantling the equipment so you can refer to it later when assembling it. Keep this instruction guide in the box with the equipment.
Once you have the wires or cables disconnected, use twist ties to carefully secure the cables so they don't unravel. Place the cables and wires into a sealable bag (I use Ziplock baggies) and tape it to the piece of equipment.
When packing electronics, you should always use antistatic packing bubbles or popcorn. Never use materials that will conduct electricity. This could damage your electronics during handling.
Remove all parts that can be disconnected Wrap each piece separately in antistatic bubble wrap and secure ends with tape.
Use a thick layer of antistatic packing popcorn or bubble wrap to line the bottom of the box.
Place the largest piece of equipment on the bottom. Fill holes with antistatic packing material. Place smaller protected items on top.
Fill all remaining spaces with antistatic packing material. Make sure nothing rattles or will shift during the move.
Seal the box with packing tape and mark it "Fragile" and indicate which end is up. Indicate the contents and which room it belongs in.
Note: CDs and software can not tolerate high temperatures. If you have sensitive media, you may want to carry it with you as opposed to moving it on the truck. Speak to your movers about this issue before you ship it.
Need a place to store your items before you move in to your new home? Ask us about our storage facility Big Pine Storage, call for details.
Stay Connected With Us!